MELT-BLOWN POLYPROPYLENE CARTRIDGE - 5 Micron
The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. ACS-1 series uses no resin binders, lubricants, antistatic or release agents or other chemical additives. Made with 100% virgin polypropylene.

Aquafilters range of melt-blown cartridges has multiple fibre zones. These multi-fibre zones provide a graded pore structure throughout the filter's depth.
Aquafilter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter.

The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.

Aquafilter cartridges are suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its polypropylene filter media, the FCPS series removes solids in suspension in a wide range of micron ratings, protecting your water supply and enhancing a continuous supply of fresh and clean drinking water.

This filter should fit all standard 10" water filter housings.

Dimensions & Information:

Diameter: 2 1/2"

Length: 9 7/8"

Filtration ability: 5micron

Water Temp: +2 to +60C

The recommended filtration rate: 10-75 l / min.

Recommended Service Life: 1-6 months*

Made in the EU with High Quality materials.

IMPORTANT NOTICE: Do not use with water that is micro-biologically unsafe or of unknown quality without adequate disinfection before or after the system. We recommend regularly scheduled maintenance and replacement of the filter cartridge in order for the product to perform properly.

*The service life will depend upon a number of factors such as source particulate load, treatment flow volumes and good care and maintenance of the housing environment.

Deteriorisation in flow rates is a good indicator of the filter having reached it's maximum particulate absorption threshold.

Changes to taste of your filtered water or any changes in color of the filter should also result in changing the filter and servicing of the housing.